Multiphase Ideal Commuting Switch - MapleSim Help

Multiphase Ideal Commuting Switch

Multiphase ideal commuting switch

 Description The Multiphase Ideal Commuting Switch (or Ideal Commuting Switch) component contain $m$ single-phase ideal commuting switch models, each connected between corresponding phases of ${\mathrm{plug}}_{p}$, ${\mathrm{plug}}_{\mathrm{n1}}$, and ${\mathrm{plug}}_{\mathrm{n2}}$, with the control from the corresponding signal in the $\mathrm{control}$ vector input. A vector of optional thermal ports, one for each switch, is enabled if Use Heat Port is true.

Connections

 Name Description Modelica ID ${\mathrm{plug}}_{p}$ Positive $m$-phase plug plug_p ${\mathrm{plug}}_{\mathrm{n2}}$ Negative $m$-phase plug (normally opened) plug_n2 ${\mathrm{plug}}_{\mathrm{n1}}$ Negative $m$-phase plug (normally closed) plug_n1 $\mathrm{control}$ Boolean vector input control $\mathrm{Heat Port}$ heatPort

Parameters

 Name Default Units Description Modelica ID $m$ $3$ Number of phases m ${R}_{\mathrm{on}}$ * $1·{10}^{-5}$ $\mathrm{\Omega }$ Closed switch resistance Ron ${G}_{\mathrm{off}}$ * FLOATE(1,-5) $S$ Opened switch conductance Goff Use Heat Port $\mathrm{false}$ True (checked) means heat ports are enabled useHeatPort

* Starred values are vector parameters; the default is $\mathrm{fill}\left(x,m\right)$, which creates a vector with $m$ entries of $x$.

 Modelica Standard Library The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.