Prismatic Axial Flux - MapleSim Help

Prismatic Axial Flux

Prismatic permanent magnet with axial flux

 Description The Prismatic Axial Flux Permanent (or Prismatic Axial Flux) component models a prismatic permanent magnet with length $l$ and cross-sectional area $A$. The flux flow is parallel with the length and uniformly distributed across the cross section. The material parameter specifies the name of a record of class Hard Magnetic Material, which defines the magnetic material. A record of that class, with the corresponding name, must exist in the model, either at the same or higher level. Records of typical materials are in the palette Magnetic > Material > Hard. The Use default material boolean parameter, when true, sets the name of the material parameter to HardMaterial1, which corresponds to the default name assigned to a record of the appropriate class.  To use a different name, uncheck the box and enter the name in parameter that appears.
 Equations $\mathrm{\Phi }={\mathrm{\Phi }}_{p}=-{\mathrm{\Phi }}_{n}$ ${\mathrm{\Phi }}_{\mathrm{max}}={\mathrm{material.B}}_{r}A$ ${V}_{m}={V}_{{m}_{p}}-{V}_{{m}_{n}}={V}_{m,\mathrm{max}}\left(1+\frac{\mathrm{\Phi }}{{\mathrm{\Phi }}_{\mathrm{max}}}\right)$ ${V}_{m,\mathrm{max}}={\mathrm{material.H}}_{\mathrm{cB}}l$

Variables

 Name Units Description Modelica ID ${\mathrm{Vm}}_{\mathrm{max}}$ $A$ open-circuit magnetic potential Vm_max ${\mathrm{\Phi }}_{\mathrm{max}}$ $\mathrm{Wb}$ short-circuit magnetic flux Phi_max ${V}_{m}$ $A$ V_m $\mathrm{\Phi }$ $\mathrm{Wb}$ Phi

Connections

 Name Description Modelica ID ${\mathrm{port}}_{p}$ Positive magnetic port port_p ${\mathrm{port}}_{n}$ Negative magnetic port port_n

Parameters

 Name Default Units Description Modelica ID $\mathrm{material}$ Magnetic material material Use default material $\mathrm{true}$ True (checked) uses hardMaterial1 as the name for the material parameter useDefaultMaterial $l$ $0.01$ $m$ Length of prismatic shape l $A$ $0.0001$ ${m}^{2}$ Area of cross-section A