container : Array, predefined Array for holding results

The UpSample( A, factor, phase ) command up-samples the signal in the Array A.

The effect of this command is to place factor - 1 zeroes between each pair of samples in the Array A.

Before the code performing the computation runs, Maple converts A to a hardware datatype, first attempting float[8] and subsequently complex[8], unless it already has one of these datatypes. For this reason, it is most efficient if A has one of these datatypes beforehand.

The phase argument determines an offset, so that the sample value from A occurs phase positions offset in the output array. The value of phase must be non-negative and less than the value of factor.

If the container=C option is provided, then the results are put into C and C is returned. With this option, no additional memory is allocated to store the result. The container must be an Array of size N * factor, where $N$ is the number of elements of A, and it must have datatype float[8] if A is real and complex[8] if A is complex.

The SignalProcessing[UpSample] command is thread-safe as of Maple 17.

For more information on thread safety, see index/threadsafe.

$\mathrm{with}\left(\mathrm{SignalProcessing}\right)\:$

$\mathrm{interface}\left(\'\mathrm{rtablesize}\'\=20\right)\:$

$A≔\mathrm{Array}\left(\left[1\,2\,3\,4\,5\,6\right]\,\'\mathrm{datatype}\'\={\'\mathrm{float}\'}_8\right)$

$\left[\begin{array}{cccccc}1.0& 2.0& 3.0& 4.0& 5.0& 6.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,1\right)$

$\left[\begin{array}{cccccc}1.0& 2.0& 3.0& 4.0& 5.0& 6.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,2\right)$

$\left[\begin{array}{cccccccccccc}1.0& 0.0& 2.0& 0.0& 3.0& 0.0& 4.0& 0.0& 5.0& 0.0& 6.0& 0.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,3\right)$

$\left[\begin{array}{cccccccccccccccccc}1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0& 0.0& 0.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,3\,0\right)$

$\left[\begin{array}{cccccccccccccccccc}1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0& 0.0& 0.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,3\,1\right)$

$\left[\begin{array}{cccccccccccccccccc}0.0& 1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0& 0.0\end{array}\right]$

$\mathrm{UpSample}\left(A\,3\,2\right)$

$\left[\begin{array}{cccccccccccccccccc}0.0& 0.0& 1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0\end{array}\right]$

$C≔\mathrm{Array}\left(1..18\,\'\mathrm{datatype}\'\={\'\mathrm{float}\'}_8\right)\:$

$\mathrm{UpSample}\left(A\,3\,\'\mathrm{container}\'\=C\right)$

$\left[\begin{array}{cccccccccccccccccc}1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0& 0.0& 0.0\end{array}\right]$

$C$

$\left[\begin{array}{cccccccccccccccccc}1.0& 0.0& 0.0& 2.0& 0.0& 0.0& 3.0& 0.0& 0.0& 4.0& 0.0& 0.0& 5.0& 0.0& 0.0& 6.0& 0.0& 0.0\end{array}\right]$

$A≔\mathrm{Array}\left(\left[I\,-I\,1\+I\,I-1\right]\,\mathrm{datatype}\={\mathrm{complex}}_8\right)$

$\left[\begin{array}{cccc}0.0\+1.0\mathrm{I}& 0.0-1.0\mathrm{I}& 1.0\+1.0\mathrm{I}& -1.0\+1.0\mathrm{I}\end{array}\right]$

$C≔\mathrm{Array}\left(1..8\,\'\mathrm{datatype}\'\={\'\mathrm{complex}\'}_8\right)\:$

$\mathrm{UpSample}\left(A\,2\,1\,\'\mathrm{container}\'\=C\right)$

$\left[\begin{array}{cccccccc}0.0\+0.0\mathrm{I}& 0.0\+1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& 0.0-1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& 1.0\+1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& -1.0\+1.0\mathrm{I}\end{array}\right]$

$C$

$\left[\begin{array}{cccccccc}0.0\+0.0\mathrm{I}& 0.0\+1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& 0.0-1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& 1.0\+1.0\mathrm{I}& 0.0\+0.0\mathrm{I}& -1.0\+1.0\mathrm{I}\end{array}\right]$

The SignalProcessing[UpSample] command was introduced in Maple 17.

For more information on Maple 17 changes, see Updates in Maple 17.