Multi Contact - MapleSim Help

Multi Contact

Multiple Heat Contact

 Description The Multi Contact component models multiple Heat Contacts. The total number of Heat Contact components is determined by the $\mathrm{Nodes}$ parameter. The following image uses Heat Contact components to illustrate the behavior of Multi Contact component.
 Equations (For details, see Heat Contact   help).
 Variables (For details, see Heat Contact   help).

Connections

 Name Units Condition Description Modelica ID $\mathrm{port_a}\left[i\right]$ i-th thermal port, a port_a[i] $\mathrm{port_b}\left[i\right]$ i-th thermal port, b port_b[i] $\mathrm{sw}\left[i\right]$ i-th input signal to control the condition of contact sw[i]

Parameters

 Symbol Default Units Description Modelica ID $\mathrm{Nodes}$ $2$ $-$ Number of nodes numNode $\mathrm{R__on}$ $1.0\cdot {10}^{-7}$ $\frac{K}{W}$ Heat resistance for each Heat Contact when the contact is valid. Ron $\mathrm{G__off}$ $1.0\cdot {10}^{-7}$ $\frac{W}{K}$ Heat conductance for each Heat Contact when the contact is invalid. Goff